Ask Danny | Ep. 16: Top 5 Simple Solutions for Bathroom Maintenance

---

This 7 days, Today’s House owner Radio Show co-host Joe Truini gives his Major 5 Straightforward Remedies for the bathroom.

---

Drinking water Place Remover for Shower Doors

Does your glass shower doorway have drinking water spots? They’re a agony to take out, and standard cleaners merely can’t do the work. Effectively, here’s a secret h2o spot remover that you may perhaps currently have with no acknowledging it!

No person would like to wipe their shower door every single time just after they use it to prevent h2o spots. And let’s be honest — who has the time for that?

Which is why it allows to have the correct tool for standard maintenance.

I like to use a glass cleaner with a method that consists of rain repellant — like this a single. (This is an affiliate website link. If you acquire this product, we will receive a small commission at no extra charge to you.)

This form of product or service is commonly advertised for cleansing bugs and eliminating drinking water places from car or truck or truck windshields, but that doesn’t suggest it only performs on these surfaces! So search in the automotive aisle if you just cannot locate the merchandise around basic cleaners.

Now, why does this merchandise function about normal residence cleaners?

It is for the reason that the rain-repellant method leads to h2o to bead up and repel off the shower door. That implies your glass shower enclosure will have no drinking water places!

Here’s how it operates: Just spray the cleaner on the glass and use a towel to wipe it off — I constantly use a cotton microfiber towel.

Now you have an easy water spot remover! Not only is the glass cleanse, but it also repels water with no recognizing.

Observe: Simple Drinking water Place Remover for Your Shower Door

---

How to Thoroughly clean and Deodorize Bath Sink

It is not normally you convey baking soda and vinegar into a lavatory, but you can use them to cleanse and deodorize a rest room sink.

Sinks often turn out to be slow-draining, and they can get clogged up with cleaning soap scum and hair. They will also develop a very funky odor, so here’s how to get rid of that.

Begin with one particular-3rd cup of baking soda. You really don’t have to be way too exact, but you will want to take about a 3rd of a cup or so and dump it in the drain.

Future, consider one full cup of vinegar. White vinegar is a really robust cleansing agent that you can use all around the property.

Following it hits the baking soda, allow it fizz down for a few minutes. Some folks could possibly use bleach right here, but bleach can really eat the finish proper off of some tub fixtures, so you do not want to use it.

Soon after the baking soda and vinegar have calmed down a minor bit, comply with up with a entire kettle of very hot h2o. This will, in combination with the vinegar and the baking soda, lower by way of anything at all that could be clogging up the sink.

If you do this cure after a thirty day period, you are going to have a truly sweet-smelling sink and a absolutely free-flowing drain.

Enjoy: The Easy Way to Cleanse and Deodorize Your Sink

---

How to Exchange a Bathroom Flapper Valve

If you have a toilet that’s constantly jogging, the perpetrator is probable a leaky flapper valve. In excess of time, flapper valves may well turn into cracked or warped, which can let h2o to leak out.

Here’s how to change it:

• Flip the drinking water off to your rest room.
• Flush the drinking water out so the tank is vacant
• Unhook the old flapper valve and snap on the new just one.
• Modify the chain to make positive the duration is correct.
• Turn the water back again on and flush the rest room a pair of times to make positive the flapper valve is functioning effectively.

View: How to Substitute Toilet Flapper Valve

---

How to Ability-Thoroughly clean Bath Tiles

Scrub brushes do the job properly for cleansing, but they call for a whole lot of elbow grease. To transform a typical hand scrub brush into a power attachment for your drill:

1. Slash the cope with off a round scrub brush.
2. Drill a hole in the center of the brush.
3. Insert a 4-inch long machine bolt in the gap from the bristle aspect.
4. Put a washer and nut on the back aspect and tighten it up.
5. Chuck the bolt into a drill.
6. Operate the drill at medium speed when working with the scrub brush attachment.

Observe: How to Cleanse Tiles More quickly Than At any time

---

How to Clean up a Clogged Showerhead

Showerhead spray nozzles can grow to be clogged in excess of time with mineral deposits located in tap drinking water.

To thoroughly clean a showerhead so it sprays uniformly:

• Area a plastic bag filled with white distilled vinegar more than the showerhead.
• Attach a twist tie all-around the showerhead arm to keep the bag in position.
• Make it possible for the showerhead to soak in the vinegar for one to two times.
• Take away the bag and change the showerhead on total pressure.

If the nozzles are nonetheless clogged, repeat the soaking course of action till apparent.

Check out: How to Thoroughly clean a Clogged Showerhead

---

Even further Examining